Blast Furnace Valves
Hot Blast Valve
The Kinney-DDS hot blast valve is designed and service proven for continuous operation to stove dome temperatures. Stove change time is kept to a minimum as it takes only 10 seconds to open or close the valve. Compared to mushroom valve designs, less space is required, the pressure drop is negligible, costly piping and cable devices are eliminated; also the capital equipment cost is considerably less. The Kinney-DDS valve can also be used for backdrafting stack control-and further, is interchangeable with the stove burner valve with slight alterations.
Water Cooled Burner Valve
Stove changing from "gas" to "blast" is now fast and safe, because of the Kinney Water-Cooled Burner Valve which has replaced the conventional burner door on many blast furnace stoves. The valve opens or closes in 10 seconds to complete the stove changing cycle, and incorporates electromechanical methods which insure maximum safety of operation. A number of patented features are incorporated in the valve. Completely steel fabricated and self-supporting, it adapts to all installations requiring minimum space; needs no costly and restrictive pits or foundations.
Butterfly Valve - Rubber Seated
* sizes 20" through 60" * fabricated steel body and disc * designed for operating pressures to 25 psi * manual, motor or cylinder operation
Butterfly Valve - Water Cooled
* Totally Water Cooled * for temperatures to 2000 degrees F * tight sealing removable airfoil design seat * water cooled body, disc and shaft- with unique water channels * Sizes: 20"-120" * horizontal or vertical installation * manual, electric, pneumatic or hydraulic operation * positive internal stops * ideal for use in electric furnaces- for scrap pre-heat or discharge gases
Swing Goggle Valve
Simplified design, ruggedly and dependably built, easy to operate and economical to maintain - are the principal advantages of the Kinney Swing Goggle Valve. The valve will render an absolute tight shut-off in blast furnace, basic oxygen, open hearth or other gas mains. It is designed for vertical operation in a horizontal main - with rollers and other daptations provided for horizontal operation in a vertical main.
Hydraulic Ram Goggle Valve
The valve is manufactured under exacting conditions to provide the finest quality of workmanship. It is ruggedly constructed of welded, fabricated steel. It is a self-contained unit and is so designed that no supports are necessary other than those normally required for supporting the main.